Onder 2.7 Gerechtshof Den Haag 21 april 2020

[0062] Referring to F1G. 2, the waste toner container 20 may include a cleaning unit or area 21, a container or waste toner storage area 23, and a connecting unit or area 22. In the cleaning unit 21, the photoconductive drum 1 and the cleaning member 6 contact each other to remove the waste toner. The storage area 23 is spaced apart from the cleaning area 21, and the connecting area 22 connects the cleaning area 21 and the storage area 23. The waste toner removed from the surface of the photoconductive drum 1 is piled up on the cleaning area 21 until it fully fills the cleaning area 21 and is gradually transferred to the connecting area 22 and the storage area 23. After printing of an image is completed, an internal temperature of the image forming apparatus gradually decreases by residual heat of the fixing unit 400. Thus, the waste toner in the waste toner container 20, in particular, the cleaning area 21, may be hardened by residual beat of the fixing unit 400 and be transformed into a lump state. Also, the lump-form waste toner is attached to the front end of the cleaning member 6 and interrupts a transfer of the waste toner to the waste toner container 20 so that the waste toner may leak to the outside through a gap 93a between the photoconductive drum 1 and the housing 90.

$ curl -s https://bron.page/api/v1/blobs/91cd6bb72f5e3757c23e730a4403161666cfbf3b9ef25529dfcf0a564dc2f8e2 | shasum -a 256